Articles

Issue/Error Messages, Reference and/or NonAdmin HowTo's about: Backups Directory Services Domains Network Interfaces

• Changing the MTU of Network Interfaces in Kerio Control

  Overview The MTU (maximum transmission unit) is the maximum size of an IP packet that can be transmitted without fragmentation. If your network device requires a specific MTU (as, for example, some ty...

• Configuring High Availability in Kerio Control

  Overview: Kerio Control version 9.3 or newer supports High Availability in Active/Passive mode. Having this configuration in place ensures that if the Master Kerio Control appliance fails, the Slave a...

• Kerio Control High Availability (HA) Special cases

  Overview: This article explains various special cases in High availability configuration 1-Wifi Control will disable Wifi on slave whenever HA validation completes. It will enable Wifi again when the ...

• Functionalities of the IP Tools Interface

  Overview IP Tools is an interface that is located in the Status area of the administration dashboard. It helps the administrators in troubleshooting the connectivity issues and obtaining information a...

• Setting up VLAN in the Hyper-V Environment of Kerio Control

  Overview This article provides information about the advanced VLAN configuration settings in the Hyper-V environment of Kerio Control.   Preconditions One physical ethernet card in a server that is co...