Overview
An important ability for Network fax packages is to be able to determine the right recipient of an incoming fax. GFI FaxMaker supports several ways of achieving this. Each method has its advantages and disadvantages.
Overall, DID (Direct Inward Dial) routing is preferred for larger installations, and MSN and Line routing for smaller installations.
This article discusses all the routing methods, their advantages, and requirements.
Information
NOTE: These routing methods can be set up via Routing in the GFI FaxMaker Configuration.
Routing Methods
- DID Routing (ISDN or Analog DID Trunk)
- MSN Routing (ISDN Only)
- OCR Routing
- Line Routing
- Routing a Fax Using DTMF/DID Routing
- CSID Routing
- Manual Routing
DID Routing (ISDN or Analog DID Trunk)
- Using either an ISDN (Integrated Services Digital Network) line or a DID (Direct Inward Dialing) trunk, users can be assigned personal fax numbers without having to install physical fax lines for each number. The number of the line is passed to GFI FaxMaker upon receiving the fax, and therefore GFI FaxMaker can route the fax to the correct user.
- ISDN/DID routing is generally considered the most reliable form of automatic inbound routing.
- DID requires you to purchase virtual phone numbers from your telecom company, which you can assign to users or departments. The virtual phone number (DID number) will be passed to GFI FaxMaker so that GFI FaxMaker knows to whom the fax should be routed. The system is completely transparent to the caller and does not require any effort on his/her part.
| REQUIREMENTS | |
|---|---|
| For routing based on ISDN/DID |
|
| For routing based on analog DID |
|
| RECOMMENDED ENVIRONMENT | |
|
Any environment where 100% reliability is required for inbound fax routing. |
|
MSN Routing (ISDN Only)
- This method is similar to DID routing.
- It is only supported if using ISDN.
- If using MSN (Multiple Subscriber Numbering) routing, you do not need to purchase DID numbers. Each ISDN line has 1 or more MSN numbers (usually 9) assigned to it.
- For an ISDN card to answer a line, you need to specify which MSN numbers it should pick up the line for. If your ISDN line has 9 MSN numbers, you can have 9 different routes for fax.
| RECOMMENDED ENVIRONMENT |
|
Any environment where 100% reliability is required for inbound fax routing. |
OCR Routing
- This method routes the fax to the correct user by recognizing the text on the fax OCR (Optical Character Recognition) and finding keywords related to a recipient. For example, a first name, last name or job function.
- If GFI FaxMaker cannot match a recipient, it will route the fax to the default recipient or router.
| REQUIREMENTS |
|---|
|
| RECOMMENDED ENVIRONMENT |
|
It will work in smaller companies or departments where received faxes are typewritten. NOTE: OCR routing will achieve approximately 70% accuracy. This means that it will alleviate, but not eliminate the routing burden. For obvious reasons, it will not be able to distinguish between users with the same name. |
Line Routing
Line routing allows assigning a physical fax line to a user. For example, if your office had 4 fax machines in each department prior to purchase of GFI FaxMaker, you could use those 4 fax lines with 4 fax modems to route the faxes to each department based on the number on which it was received.
| REQUIREMENTS |
|---|
| Two or more physical fax lines. |
| RECOMMENDED ENVIRONMENT |
|
Highly recommended for environments where routing the fax to a specific department or workgroup is sufficient.
|
Routing a Fax Using DTMF/DID Routing
- DTMF (Dual-Tone Multi-Frequency) tones are generated by a telephone handset and can be used to identify a recipient.
- DTMF uses two tones to represent each key on the touchpad. When any key is pressed, the tone of the column and the tone of the row are generated, hence dual-tone. As an example, pressing the '5' button generates the tones 770Hz and 1336Hz.
- DTMF routing is most frequently used in combination with a voice modem and a PBX that supports DID/DTMF conversion. In this case, you can use excess DID lines from the PBX to route the fax to an extension. The PBX will convert the DID tones to DTMF and forward them to the modem after the modem beep. Most common PBXs support the conversion from DID to DTMF.
The system works in the following order:
- The caller dials the fax number and waits until the call is answered.
- The fax card/modem will now transmit a tone, after which the caller/PBX must enter the DTMF routing number.
- The GFI FaxMaker fax server will recognize the DTMF number and use it to identify the recipient of the fax.
| REQUIREMENTS |
|---|
|
A GFI Software supported modem that supports a voice chipset OR a Dialogic Brooktrout fax card. If a PBX is used, the Network Administrator should have advanced technical telecommunications knowledge to operate and program the PBX. |
| RECOMMENDED ENVIRONMENT |
|
Only in specific environments where a special PBX is available or where one can explain to the callers (i.e. the senders of the fax) how to input the DTMF number.
|
NOTE: Do not enable DTMF/DID routing unless you have a compatible voice modem or a compatible ISDN/fax card correctly set up. Compatible voice modems are modems that have a Rockwell voice chipset. You must also select the corresponding driver in Modem properties as Voice modem (Rockwell). If you enable DTMF routing without having a voice modem or an ISDN card, the fax server will generate an error while receiving.
CSID Routing
CSID (Caller Sender Identification) relies on the FAX ID, which a FAX machine or FAX card displays when sending a fax. Since it rarely changes, it can be used to identify the sender and thus the corresponding recipient.
| RECOMMENDED ENVIRONMENT |
|
Only in specific environments where each user faxes to different companies. For example, if your sales and support people both interact with the same company, then CSID routing is not recommended.
|
Manual Routing
When no recipient can be determined for the fax, the faxes are routed to a designated mailbox, from where the inbound fax router or a person designated to route faxes can view the fax and select the right recipient. This mailbox can be the mailbox of a particular user, or it can be an Exchange public folder.
Priyanka Bhotika
Comments