Phone Lines icon GFI Support Home Sign in
Start a conversation
  1. GFI Support
  2. GFI Support - Interface
  3. Articles

Exinda CLI: Web UI and Web Proxy

Overview

 

This article provides information regarding the Exinda CLI command web.

You can use the web command to configure the web user interface (Web UI).

 

Information

 

NOTE:  The following syntax convention is used:
  • {}: Options are enclosed in braces and are separated by '|'
  • []: Optional keywords are enclosed in brackets
  • <>: User input is required where variables are enclosed in greater-than and less-than symbols

The following table describes the commands used for performing common actions related to web:

Action Description Command

Parameter Description

To enable or disable the Web UI

 [no] web enable Not Applicable 

To configure the length of user inactivity before auto-logout (in seconds)

 web auto-logout <time> Not Applicable 
To configure HTTP access to the Web UI web http {enable|port|redirect|restrict}
  • enable - Enable HTTP access to web UI.
  • port <port-number> - Set the port number for HTTP access to the web UI.
  • redirect - Enable redirection to https.
  • restrict <network-object> - Restrict access to the web UI for a particular named network object.
To configure HTTPS access to the Web UI https {enable|certificate|customssl|port|restrict}
  • enable - Enable https access to the web UI.
  • port <port-number> - Set the port number for https access to the web UI.
  • certificate regenerate - Configure a certificate for use for https connections.
  • customssl - Configure a custom SSL certificate.
  • restrict <network-object> - Restrict access to the web UI for a particular named network object.
To configure a custom SSL certificate https customssl {enable|certificate|generate csr country <country> state <state> location <location> organization <org> hostname <hostname>|privatekey}
  • certificate <certificate> – Specify the certificate to use.
  • country <country> – Type your country code. E.g. US.
  • state <state> – Type your state. E.g. California.
  • location <location> – Type your location. E.g. "San Franscisco".
  • organization <org> – Type your organization. E.g. "Exinda Networks".
  • hostname <hostname> – Type your full hostname to access your appliance.
  • privatekey <pkey> – Type a custom SSL private key that you have obtained or generated.

To configure renewal and timeout session settings

web session {renewal <number-of-minutes>|timeout <number-of-minutes>}

 Not Applicable 

To enable or disable deflate compression encoding

 [no] web httpd compression Not Applicable 

To enable or disable Web interface restrictions

 [no] web httpd listen {enable|interface <interface>} Not Applicable 

To restrict the listen interface for the Web UI. The configured interface should be statically configured (DHCP disabled)

 web httpd listen interface <interface> Not Applicable 

Configure the web proxy host address and port

 web proxy host <hostname or IP address> [port <port>]

host <hostname or IP address> - IPv4 and IPv6 addresses can be used.

To configure the type of proxy authentication

 web proxy auth authtype {none|basic} Not Applicable 

Configure the username and password for basic authentication

 web proxy auth basic {password|username} Not Applicable 

To show Web UI configuration and running state

 show web Not Applicable 

 

Find more CLI commands.

Back to Top

Choose files or drag and drop files
Was this article helpful?
Yes
No

  1. Priyanka Bhotika

  2. Posted
  3. Updated

Comments