Articles

FaxMaker Section

• What is CAPI?

  AnswerCommon ISDN API (CAPI) is an application programming interface standard used to access ISDN equipment connected to basic rate interfaces (BRI) and primary rate interfaces (PRI). CAPI 2.0 is an a...

• What is NetPrintQueue2Fax and how does it work?

  Answer Applies to: GFI FaxMaker NetPrintQueue2FAX is a printer driver that is installed with the GFI FaxMaker Software.  The shared NetPrintQueue2Fax printer can be installed on a supported client mac...

• Best Practices for Inbound SMS Routing

  Overview This article provides the best practices for inbound SMS routing. Information The following are things to consider when setting up inbound SMS routing: It is recommended that you enable the c...

• Difference Between a Caller ID and a Remote ID

  Overview This article provides a brief description of a Caller ID and a Remote ID in GFI FaxMaker. Information Things to note: For outbound faxing, the Caller ID of the sender is usually the sender fa...

• Difference Between Fax Class 1, 1.0, 2 and 2.0

  Overview This article describes the difference between various Fax classes. Information Class 1: A class 1 fax modem is little more than a data modem that has a very basic fax command set for handling...

• What is the main difference between class and group 3 fax modem?

  Answer The most common fax classes for fax modems are Class 1 and Class 2 where Class 1.0 and Class 2.0 are standardized by the ITU-T.These classes are an extensions to the basic Hayes command set. Cl...

• Maximum Number of Attachments in Email Fax Requests

  It is possible to attach up to 64 attachments to a single message; however, this is strongly discouraged. To ensure the batch processing portion of the conversion process runs efficiently for outgoing...

• Maximum Print Job Size Supported by NetPrintQueue2Fax

  Overview This article briefly provides information on whether or not there is a limitation to the print job size that is supported by NetPrintQueue2Fax (NPQ2F). Information There is no limitation set ...

• Using the Resend Code

  Overview When a Fax send attempt has occurred in GFI FaxMaker and the default options are enabled, the sending user should receive a Transmission Report to Email stating whether the Fax job was succes...

• The Size of a Single Page Fax

  Overview The size of a fax page will vary according to the contents of the fax and also according to the format of the report. This article provides some sample file sizes (in KB) which may help you p...