FaxMaker Section
Overview This article answers the query: Which modems does GFI FaxMaker support? Information For users relying heavily on faxing GFI Software recommends professional fax hardware or virtual Fax-over...
Overview This article answers the query: Which Mainpine cards does GFI FaxMaker support? Information GFI Faxmaker supports the following Mainpine cards: Mainpine RockForce series 2 ports: RockForce ...
Overview This article answers the query: Which PrimuX cards does GFI FaxMaker support? Information GFI Faxmaker supports the following PrimuX cards: PrimuX 2S0 (BRI) PrimuX 1S2M (PRI) Related Arti...
This article provides information regarding the TIFF format supported by GFI FaxMaker. When sending a TIFF file as a fax attachment, the TIFF file compression must be CCITT(Group3 1d). The proper...
AnswerNOTE: GFI FaxMaker 19 and newer does not support Sangoma cards. Applies to GFI FaxMaker 2014 or higher GFI FaxMaker supports the following Sangoma devices: Sangoma A200 PCIe Sangoma A101 PCIe GF...
Versions / Builds AffectedFM 2013 (20121116 & 20121205) to current StatusResolved Problem SummaryWhite lines appear in etherFAX faxes TT / JIRAID312 How to IdentifyWhite lines appear in received ether...
AnswerIf the Wait for Dialtone and Tone Dialing options are enabled in the GFI FaxMaker Configuration, then GFI FaxMaker will preface the character W and the character T in front of the dialed number....
AnswerGFI FaxMaker monitor is not a real-time monitor. Therefore, the connection time in the GFI FaxMaker monitor is an estimated time which differs from the exact connection time logged in the fax tr...
Overview Documents that were generated by a 3rd party application and then printed on to the NetPrintQueue2Fax printer fail to be faxed with the following error: No recipient found. This article des...
Overview The Message Transfer Agent Monitor in GFI FaxMaker shows the following error message and the Outbound transfer thread as 'Logging off': Error 1053: The service did not respond to the start or...
